Friday, March 2, 2012

Well, There's Your Problem...!

OK, I've been dreading this post, but I guess it has to happen eventually no matter how painful it may be for me... I promised myself when I started the blog it would be a warts-and-all learning experience, and that even if I screwed up I would share my mistakes as well as my successes, otherwise how would people learn? How would I learn unless I was honest enough to share the goofs along with the insights?

Well, my friends... I goofed, bigtime. On the awesome sleepsack I was putting together on the last few posts... Completely, f'd it up. What happened, you say?

It is painful to admit, but I made a kind of beginner's mistake. It was something I didn't even notice until I was ready to finish the back of the sack, and started placing the zipper... let me rewind a little bit.

You see, this sack is designed to both lace and zip up in the rear. And in order to keep the lacing panel somewhat centered, I offset the zipper to one side. This means the panels that form the rear of the sack are slightly smaller on the zipper side, and slightly larger on the lacing-only side. That size difference needs to be the same on all the rear-panel pieces: the hood, the shoulders, and the left and right body panels... Can you see where this is headed...? I ended up cutting the hood so the smaller panel is on the left-hand side, and the rear body panel with the smaller panel on the right. I didn't notice the mistake until I tried to sew in the zipper, only to discover (to my horror) what I had done...

It was as simple as flipping over the 2 pattern pieces for the rear hood panels. That would've fixed the whole thing. But the problem is, I didn't catch it until the parts were already sewn together.

Because the hood was already sewn to the shoulders, and the shoulders were sewn to the body, and all these seams were topstitched and trimmed, there was no good way to salvage the project, at least as it was intended to be. I may yet come up with a way to get something out of it somehow, but if not, I guess I can make some really nice wallets for everyone on my Christmas list this year.

I just have to chalk this up as another one of those painful learning experiences, and know that at least next time I won't make this particular mistake again. There, I feel better now. Thanks for listening.

11 comments:

  1. I feel with you - there is notning worse than bondoggle work !!
    The people that does something is the people that encounter something.
    Have a great weekend though.
    Mikeone

    ReplyDelete
    Replies
    1. Hey MikeOne, Yeah, it's a real "kick in the gut" kind of feeling when you realize your mistake. I know what you are saying, though: no risk, no reward - and I agree 100%. Thanks for the comment!

      Delete
  2. It's amazing how much you push out between this sort of major f-up! Ah well.

    Are you going to try this project again with new leather?

    ReplyDelete
    Replies
    1. Oh well is right. I just am going to get on it and try again. I have the new leather ready to go, and getting it right next time will make me feel much better.

      Delete
  3. Dear Chris,
    I feel so sorry for that happened, but I can tell you you are not alone to make these mistakes.
    Somehow we all learn about mistakes. My mistake for a while ago was I forgot to turn my pattern around so I should got one piece like a mirror.
    It was my last piece of a fantastic leather from a deer, I mean it was incredible nice.
    I got two right backpieces to my leatherpants, and I realized when i have cutted the piece out.
    Well, Now I always check so I have all pieces right before my sissors get near the leather.
    Dont worry be happy as I learned when I was in the States for 25 years ago.

    All the Best

    ReplyDelete
    Replies
    1. Thanks, I appreciate it... I know you should always measure once, and cut twice, but in this case it just slipped through. With complex projects like this, it's easier than you think!

      Delete
  4. Gasp!!! You're Human?
    Learning experience, and you passed.
    J&W

    ReplyDelete
    Replies
    1. Thanks Jim & Wendy... I won't forget this lesson any time soon, I can assure you.

      Delete
  5. To err is to be human. One has to f something up, at some point, in order to become better. I've been there, with a picture showing me my f up that went into production. Sucked, but it was necessary.

    Hang in there, and pursue excellence!

    -Dan

    ReplyDelete
  6. Sounds to me like you simple need to remake the hood.

    ReplyDelete
    Replies
    1. It's a little more than that, as I would need to remove the hood and the topstitching, and with the new seam allowance added in, I would be at least a half-inch short.

      Delete