Locking bondage hood v2.0

Hello all! I'm posting some images of the hood I just finished up that goes with the armbinder from my last post. I decided to re-do this piece as well, as the tongue didn't allow an easy on-and-off experience for the client, and I felt that I could do a little better. Based on the photos and feedback they sent, I knew there were some things I wanted to change.

The tongue on this piece is made a bit larger, and made of a lighter matching leather, that will allow the tongue to stretch a bit more than in the previous version. It should make getting it on and off easier.

I also extended parts of the rear panels slightly, which should result in the lacing panels coming slightly closer together when the laces are pulled tight... Still not touching, though - it's always nice to have room to go tighter if you need to, don't you think?

Last time there was also a problem with a grommet whose backing washer came undone. This is probably because I was using a grommet that was too small for the thickness of the leather. I was trying to keep everything petite since the scale and size of these restraints is so small. Since I up sized the grommets on the armbinder, I wanted to also up size the grommets on the hood, to make sure both pieces would match perfectly.
This is a real intense hood to wear, as the leather is quite thick. It is soft, and will stretch some (especially over time), but the feeling inside this hood would be quite severe. Not for panickers or the claustrophobic... Unless you want to be really mean! For serious players only.
This time I tried a different approach on the locking strap. I sewed the strap from two parts, using the same leather as the hood on the outside, and a patent leather on the inside. I think it results in a thinner strap, and the patent (being stiffer) doesn't stretch as much. Stronger and thinner was the goal.
I think it came out nice...
Also, I managed to find a small D-ring (shorter than the hasp I used last time), and made the connection with a single rivet. It looks really clean, and anything that reduces bulk around the neck is a good thing. I think this is my new default method.

One final tweak to make sure it is easy to get this hood on: a zipper on the tongue itself. This allows you to open the rear quite wide. Pull the zipper down, and no hair in the laces - good times.
This hood (and matching armbinder) came out really great. Now that both pieces are done, I get to send them off to the client, and hopefully they are happy with their new toys as well.
I can't wait to hear what they think!